> News & Announcements > City Hall > Departments > Public Works > Standards and Specifications 2004 Part Four

Standards and Specifications 2004 Part Four

Standard Drawings

Miscellaneous
M-1 Survey Monument Installation with Frame
M-2 Brass Cap for Survey Monument
M-3 Chain Link Fence

Parks
PR-1 Tree Staking
PR-2 Tree Well
PR-3 Root Control Barrier - Details
PR-4 Root Control Barrier - Typical Specification
PR-5 Reduced Pressure Backflow Prevention Device
PR-6 Pop-Up Sprinkler Head Installation
PR-7 Remote Control Valve Detail
PR-8 Pressure Gauge Detail
PR-9 Quick Coupler Installation
PR-10 Gate Valve Assembly
PR-11 Irrigation Thrust Blocks for Main Lines
PR-12 Median Planting Clearances
PR-13 Street Tree Clearances
PR-14 Sidewalk Tree Placement
PR-15 Dripline Subsurface Irrigation System Details
PR-16 Typical Dripline Layouts
PR-17 Shrub/Tree Bubbler
PR-18 Trunk and Branch Structure
PR-19 Tree Planting Details


Streets
S-1 Street Design Criteria, Typical Section, Intersection & Cul-de-Sac
S-2 Curb, Gutter, and Sidewalk
S-3A Driveway (Residential)
S-3B Driveway (Commercial)
S-4 Curb Ramp Details - I
S-5 Curb Ramp Details - II
S-6 Accessible Parking Details - I
S-7 Accessible Parking Details - II
S-8 Typical Pipe Trench Excavation and Backfill Requirements
S-9 Street Trenching and Patching
S-10 Typical Street Lighting
S-11 Typical Street Name Signs and Sign Location
S-12 Street Name Sign Construction
S-13 Internally Illuminated Street Name Sign - General
S-14 Internally Illuminated Street Name Sign - Fabrication Details
S-15 Internally Illuminated Street Name Sign - Bracket Details - I
S-16 Internally Illuminated Street Name Sign - Bracket Details - II
S-17 Internally Illuminated Street Name Sign - Bracket Details - III
S-18 Single Face, Monument Sign Details - I
S-19 Single Face, Monument Sign Details - II
S-20 Typical Traffic Signs Fabrication and Installation
S-21 Traffic Sign - Median Installation
S-22 Traffic Striping Markers
S-23 Parking Meter Post
S-24 Pedestrian Push Button Instructions
S-25 Off Street Parking Stall Criteria
S-26 Construction Project Identification Sign


Storm Drain
SD-1 Catch Basin - Plan, Section and Gutter Depressions
SD-2 Catch Basin - Section and Details
SD-3 Catch Basin - With Trap and Cleanout for Combined Sewer/Storm System
SD-4 Storm Drain Manholes - For Pipe 48” Diameter or Smaller
SD-5 Curb Face Drainage Outlet

Sanitary Sewer System (Revised 8/21/07)
SS-1 Non-Pressure Type Manhole Frame and Cover
SS-2 Pressure Type Manhole Frame and Cover
SS-2A Polyethylene Manhole Adjustment Ring Slope Design
SS-3 (Cast in Place) Sanitary Sewer Manhole
SS-5 Sanitary Sewer Testing Tee
SS-6 Grease & Sand Interceptor
SS-6A Grease Interceptor
SS-7 Sewer Lateral Details (For Pipes Smaller than 6")
SS-7A Sewer Lateral Connections (For 6" Pipe and Larger)
SS-8 New Sewer Pipe Support Across Trenches
SS-9 Side Sewers at Utility Intersections
SS-10 Trench Dam
SS-11 Flexible Connection at Manhole Tie-In
SS-12 Clean Out & Backwater Valve
SS-13 New Utility Pipe Crossing Existing Sewer Pipe

Water System (Revised 8/21/07)
W-1 1” Water Service Lateral - Connection for 3/4” or 1” Meter
W-2 Water Service Lateral - 1” and 1-1/2” Combination Service Connections
W-3 2” Water Service Lateral for 1-1/2” or 2” Meter
W-4 Water Service Lateral - 3" and Larger
W-5 Water Main Connection - Fire Hydrants (Residential Area)
W-5A Water Main Connection - Fire Hydrant Valve Detail (Residential Area)
W-6 Water Main Connection - Fire Hydrants (Commercial Area)
W-7 Below Ground Blow-Off Details
W-7A Above Ground Blow-Off Details
W-8 Air Release Valve Assembly
W-8A Reduced Pressure Backflow Prevention Device
W-9 Fire Detector - Check Valve and Connections
W-9A Fire Service for Multi-Storey Residential Building (As Required)
W-10 Water Main Thrust Blocks
W-11 Angle Marker Details

Back to Top